Avago Technologies MegaRAID SAS 9240-4i User Manual
Storcli
Advertising
This manual is related to the following products:
MegaRAID SAS 9240-8i, MegaRAID SAS 9260-16i, MegaRAID SAS 9260-4i, MegaRAID SAS 9260-8i, MegaRAID SAS 9261-8i, MegaRAID SAS 9266-4i, MegaRAID SAS 9266-8i, MegaRAID SAS 9270-8i, MegaRAID SAS 9271-4i, MegaRAID SAS 9271-8i, MegaRAID SAS 9271-8iCC, MegaRAID SAS 9280-16i4e, MegaRAID SAS 9280-24i4e, MegaRAID SAS 9280-4i4e, MegaRAID SAS 9280-8e, MegaRAID SAS 9286-8e, MegaRAID SAS 9286CV-8e, MegaRAID SAS 9286CV-8eCC, MegaRAID SAS 9285-8ecv
Table of contents
Document Outline
- StorCLI Reference Manual
- Chapter 1: Introduction
- Chapter 2: Installation
- 2.1 Installing StorCLI on Microsoft Windows Operating Systems
- 2.2 Installing StorCLI on Linux Operating Systems
- 2.3 Installing StorCLI on VMware Operating Systems
- 2.4 Installing StorCLI on FreeBSD Operating Systems
- 2.5 Installing StorCLI on the Microsoft EFI
- 2.6 Installing StorCLI on Solaris Operating Systems
- Chapter 3: StorCLI Command Syntax
- Chapter 4: Working with the Storage Command Line Tool
- 4.1 System Commands
- 4.2 Controller Commands
- 4.3 Drive Commands
- 4.3.1 Drive Show Commands
- 4.3.2 Missing Drives Commands
- 4.3.3 Set Drive State Commands
- 4.3.4 Drive Initialization Commands
- 4.3.5 Drive Firmware Download Commands
- 4.3.6 Locate Drives Commands
- 4.3.7 Prepare to Remove Drives Commands
- 4.3.8 Drive Security Commands
- 4.3.9 Drive Secure Erase Commands
- 4.3.10 Rebuild Drives Commands
- 4.3.11 Drive Copyback Commands
- 4.3.12 Hot Spare Drive Commands
- 4.3.13 Drive Security Commands
- 4.4 Virtual Drives Commands
- 4.4.1 Add Virtual Drives Commands
- 4.4.2 Delete Virtual Drives Commands
- 4.4.3 Virtual Drive Show Commands
- 4.4.4 Preserved Cache Commands
- 4.4.5 Change Virtual Drive Properties Commands
- 4.4.6 Virtual Drive Initialization Commands
- 4.4.7 Virtual Drive Erase Commands
- 4.4.8 Virtual Drive Migration Commands
- 4.4.9 Virtual Drive Consistency Check Commands
- 4.4.10 Background Initialization Commands
- 4.4.11 Virtual Drive Expansion Commands
- 4.5 Foreign Configurations Commands
- 4.6 BIOS-Related Commands
- 4.7 Drive Group Commands
- 4.8 Dimmer Switch Commands
- 4.9 BBU Commands
- 4.10 Enclosure Commands
- 4.11 PHY Commands
- 4.12 Logging Commands
- Chapter 5: Frequently Used Tasks
- 5.1 Showing the Version of the Storage Command Line Tool
- 5.2 Showing StorCLI Help
- 5.3 Showing System Summary Information
- 5.4 Showing Free Space in a Controller
- 5.5 Adding Virtual Drives
- 5.6 Setting the Cache Policy in a Virtual Drive
- 5.7 Showing Virtual Drive Information
- 5.8 Deleting Virtual Drives
- 5.9 Flashing Controller Firmware
- Appendix A: 3Ware CLI Commands to StorCLI Command Conversion
- Appendix B: MegaCLI Commands to StorCLI Command Conversion
- Appendix C: Unsupported Commands in Embedded MegaRAID
- Appendix D: Revision Information