Appendix a voice communication samples, Case 1: ata to ata connection via ip address – PLANET VIP-156PE User Manual
Page 59
SIP Analog Telephone Adapter
59
Appendix A Voice Communication Samples
There are several ways to make calls to desired destination in ATA. In this section, we’ll lead you step
by step to establish your first voice communication via keypad and web browsers operations.
Case 1: ATA to ATA connection via IP address
Assume there are two ATAs in the network; the IP addresses are 192.168.0.1, 192.168.0.2
Analog telephone sets are connected to the phone (RJ-11) port of ATAs respectively
192.168.0.2
192.168.0.1
1
9
2
*
1
6
8
*
0
2
#
*
Test the scenario:
1. Pick up the telephone set on ATA A.
2. Press the keypad: 192*168*0*2# and will be able to connect to the ATA B.
3. Then the phone in 192.168.0.2 should ring. Please repeat the same dialing steps on ATA B to
establish the first voice communication from ATA A