Case 7: auto answer feature_ip to pstn – PLANET VIP-156PE User Manual
Page 64
SIP Analog Telephone Adapter
64
Machine configuration on the VIP-156:
Please log in VIP-156_A via web browser and browse the Phone Settings menu and select
the Call service config menu. On the setting page, please enable the All Forward function
and fill in the Forward Type and Forward Number of VIP-156_B, and then the sample
configuration screen is shown below:
Test the scenario:
1. VIP-156_C pick up the telephone
2. Dial the IP Address 192.168.0.1(VIP-156_A)
3. Because VIP-156_A has set up All Forward function to the IP Address 192.168.0.2
(VIP-156_B)
4. The IP Address 192.168.0.2 (VIP-156_B) will ring up; then it picks up the telephone and
communication with the VIP-156_C
Case 7: Auto Answer Feature_IP to PSTN
For this example, there are one VIP-157 and two VIP-156 and connect with Peer to Peer mode. The
VIP-157_A has set Auto Answer function for forwarding calls to arbitrary telephone. If there are
incoming IP calls and VIP-157_A doesn’t answer the incoming calls after specific time, the caller will
hear prompt sounds to input the password then dial out an arbitrary PSTN telephone.