PLANET VIP-156PE - Manual (Page 68)

Case 10: Auto Answer Feature_PSTN to IP
In this example, there are one VIP-157 and two VIP-156 and connect with Peer to Peer mode. The
VIP-157_A had set Auto Answer function for forwarding to arbitrary telephone. If there have incoming
PSTN calls and VIP-157_A doesn’t answer the incoming calls after specific time, the caller will hear
prompt sounds to input the password and then dial out an arbitrary IP telephone.
Machine configuration on the VIP-157:
STEP 1:
Please log in VIP-157_A via web browser, browse to the Phone Settings menu and select
the Auto Answer config menu. In the setting page, please enable the Auto Answer and
PIN Code Enabled function, and then the sample configuration screen is shown below:
STEP 2:
Please log in VIP-157_A via web browser, browse to the Phone Book menu and select the
Speed Dial Settings config menu. In the setting page, please add a speed dial number for
dial to IP address 192.168.0.2 (VIP-156_B), and then the sample configuration screen is
shown below:
68