PLANET VIP-156PE - Manual (Page 70)

70
Appendix B The method of operation guide
In this section, we’ll introduce the steps of how to set up some call features of the ATA. Please follow
the steps below to utilize those features.
Call Transfer
A. Blind Transfer
1. B call to A and they are in the process of conversation.
2. A carry the transfer function out (Press “transfer” button) to hold the conversation with B.
3. A press “ #510# ” and hear the dial tone, then input the number of C (Follow by the “#” key).
4. C will ring up and A will get the busy tone for prompting to hang up
5. C picks up the handset and conversation with B.
B. Attendant Transfer
1. B call to A and they are in the process of conversation.
2. A carry the transfer function out to hold the conversation with B.
3. A press “ #511# ” and hear the dial tone, then input the number of C (Follow by the “#” key).
4. C will ring up.
5. C picks up the handset and conversation with A.
6. A hang up and C conversation with B.
3-Way Conference
1. A and B are in the process of conversation.
2. A want to invite C to join their conversation.
3. A press “Transfer” or “Hold” button to hold the conversation with B at first, then press “ #512# ”
and hear the dial tone, then input the number of C (plus the “#” key).
4. C will ring up and pick up the handset to conversation with A.
5. A press “Transfer” button again, and they will entry the 3-Way conference mode.
Call Waiting
1. A and B are in the process of conversation.
2. C call to A and A will hear the prompt sounds.
3. A press “Hold” button to hold the conversation with B, and switch to conversation with C.
Switch the Realm (Registration Proxy Server)
ATA can register to three different SIP Proxies at the same time. It can receive any one of different
SIP accounts incoming call, and it can switch to any one SIP accounts for making calls through input