PLANET ICF-1601 - Manual (Page 11)

Step4: Configure the Network
LCD menu configuration
1. Press 『Settings』to enter configuration menu.
2. Go to 『System Settings』Î 『Network』to configure the network
configuration.
3. Please base on your network to configure the network connection such
as Static or DHCP.
4. Select 『Net Settings』Î 『Bridge or NAT mode』and then select
『 Interface』Î 『Fixed IP/DHCP/PPPoE』and press OK to choose the
network configuration.
5. If select 『Fixed IP』, you can press up/down key to configure the IP
address, then press OK to save the changes.
11