ProSoft Technology ILX34-AENWG - Manual (Page 59)

ILX34-AENWG ♦ Point I/O Platform About the Example Applications
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 59 of 177
August 16, 2013
 C = configuration, I = input, O = output
Use the controller tags in your ladder program to read input data or write output
data.
 Slot Status Bits: The Slot Status bits display the connection status for each of
the POINT I/O modules that use a rack-optimized connection.
 Bit 0 is reserved for the adapter and always reports a value of 1.
 Each of the other bits (1 to 63) correspond to a POINT I/O module that you
install in the POINT I/O backplane.
 In this example, we configured the ILX34-AENWG adapter for both rack-
optimized and direct connections.
 The slot status bits indicate that the module in slot 2 is operating correctly:
o 0=module participating with no errors and
o 1=module not participating or connection error (typically, module
removed/missing)
3.5 Example 2 - Direct Connection
In this example, a ControlLogix controller communicates with POINT I/O modules
via the ILX34-AENWG adapter using a direct connection.
The adapter makes a direct connection to each of the modules referenced by the
data.
Attention: You must use series C POINT I/O modules with the ILX34-AENWG adapter. Series A
or B POINT I/O modules will not work with this adapter.