Database view menu – ProSoft Technology 5201-MNET-ASCII User Manual
Page 43
MNET ♦ ProLinx Gateway
Diagnostics and Troubleshooting
Modbus TCP/IP Interface Module
Driver Manual
ProSoft Technology, Inc.
Page 43 of 78
September 1, 2010
3.1.3 Database View Menu
Press [D]
from the Main menu to open the Database View menu. Use this menu
command to view the current contents of the gateway database. Press [?]
to
view a list of commands available on this menu.
To view sets of register pages, use the keys described below:
Viewing Register Pages
Command
Description
[0]
Display registers 0 to 99
[1]
Display registers 1000 to 1099
[2]
Display registers 2000 to 2099
And so on. The total number of register pages available to view depends on your
gateway’s configuration.
Press [S]
from the Database View menu to show the current page of registers
again.
Displaying the Current Page of Registers Again
This screen displays the current page of 100 registers in the database.
Press [-]
from the Database View menu to skip five pages back in the database
to see the 100 registers of data starting 500 registers before the currently
displayed page.
Moving Back Through 5 Pages of Registers