Yamaha Reface YC - Manual (Page 26)

20 reface CS/DX/CP/YC Owner’s Manual
Functions of Front Panel Components
uVOICE SELECT/EDIT section
For recalling a total of 32 Voices by changing
Bank numbers (1 to 4) and Voice numbers (1
to 8).
u-1. [BANK] button
For changing the bank number. Each time
you press this button, the number cycles
through 1 to 4.
u-3. [1]–[8] buttons
For selecting one of eight Voices from the
selected Bank.
u-2. [EDIT] button
For activating Edit mode for the selected
Voice. In this mode, you can edit sounds by
setting the EG level, LFO, and other parame-
ters from area u-3.
u-3. [OP1]–[OP4], [EG level], [EG
rate], [LFO], and [Pitch EG] but-
tons
[OP1]–[OP4]: For displaying the setting
screen for the corresponding operator.
These buttons can be pressed repeatedly to
cycle through the screen’s individual
pages.
[EG level]: For displaying the EG Level Set-
tings screen for operators. This button can
be pressed repeatedly to cycle through the
four operators.
[EG rate]: For displaying the EG Rate Set-
tings screen. This button can be pressed
repeatedly to cycle through the four opera-
tors.
[LFO]: For displaying the LFO Settings
screen. This button can be pressed repeat-
edly to cycle through the screen’s individ-
ual pages.
[Pitch EG]: For displaying the Pitch EG Set-
tings screen. This button can be pressed
repeatedly to cycle through the screen’s
individual pages.
For details regarding the [EDIT] button (u-
2) and the [OP1] to [Pitch EG] buttons (u-
3), refer to the “Reference Manual” (a digital
manual).
NOTE
If you open the Job screen by pressing the
[FUNCTION] button and then do a Voice Initial-
ize, you can start editing with parameters set
so as to produce a sine wave.
Bank number (1–4) Voice number (1–8)