Yamaha Reface YC - Manual (Page 29)

23 reface CS/DX/CP/YC Owner’s Manual
Functions of Front Panel Components
DX
!0[STORE] button
For displaying the Store Settings screen. On
this screen, you can specify where to store set-
tings and store them with a name. When you
store a Voice, it overwrites the Preset Voice
stored in the selected location. If you wish to
restore Preset Voices, do a Voice Recall (page
22) or a Factory Reset (page 22 or 40).
When you press this button, the Store screen
will be displayed.
 Store screen
 Store Name screen
!1[LOOPER] button
For displaying the Phrase Looper screen. On
this screen, you can operate the MIDI looper,
recording, overdubbing, and playing back
loop phrases. By using this section, phrases
containing a maximum of 2,000 notes or ten
minutes at 120 BPM can be temporarily
recorded.
name
Switches to the Store Name
screen.
STORE
TO
Bank
1-1 to
4-8
Sets where to store the cur-
rent Voice.
CHECK
Used if you wish to listen to
the Voice at the location
selected for storing.
Tap the switch to toggle
between
and .
: When you play the
keyboard, you will hear the
Voice selected for storing.
: When you play the
keyboard, you will hear the
Voice stored at the location
selected by using “STORE
TO BANK.”
NOTE
The [BANK] button and
buttons [1]–[8] can also be
used to make this setting.
STORE
Used to store Voices. When
you tap the switch, a confir-
mation message will be dis-
played on-screen.
Tap the “YES” switch to
store the Voice. Tap the
“NO” switch to return to the
Store screen without storing
any data.
store
Switches back to the
Store screen.

Moves the cursor to the
left.
ABC
Upper- and
lower-case
letters and
symbols
Tap the switch to display
the Name Input screen.
On this screen, you can
input a new Voice name
by flicking and tapping
the slider to select let-
ters and symbols.

Moves the cursor to the
right.