Yamaha PSR-E353 - Manual (Page 17)

Playing a Variety of Instrument Voices
PSR-E353 Owner’s Manual 17
In addition to the Main Voice, you can layer a different
Voice over the entire keyboard as a “Dual Voice.”
1
Press the [DUAL] button to turn Dual on.
2
Press the [DUAL] button again to exit
from Dual.
To select a different Dual Voice:
Although turning on Dual will select a Dual Voice suit-
able for the current Main Voice, you can easily select a
different Dual Voice by pressing and holding the [Dual]
button to call up “D.Voice” (Function 012; page 41),
then using the number buttons [0]–[9], [+], [-].
By dividing the keyboard into the two separate areas,
you can play a different Voice between the Left hand
and Right hand areas.
1
Press the [SPLIT] button to turn on Split.
The keyboard is divided into the Left hand and
Right hand areas.
You can play a “Split Voice” on the Left hand area
of the keyboard while playing a Main Voice and
Dual Voice on the Right hand area of the key-
board.
The highest key for the Left hand area is referred
to as the “Split Point” (Function 006; page 40)
which can be changed from the default F
#2 key.
2
Press the [SPLIT] button again to exit
from Split.
To select a different Split Voice:
Press and hold the [Split] button to call up “S.Voice”
(Function 016; page 41), then use the number buttons
[0]–[9], [+], [-].
Layering a Dual Voice
GrandPno 001
Appears when Dual
Voice is on
Two Voices will
sound at the
same time.
Playing a Split Voice in the Left
Hand area
GrandPno 001
Appears when Split
Voice is on
Split Voice
Main Voice and
Dual Voice
Split Point ... default setting: 054 (F #2)
036
(C1) 048
(C2)
060
(C3) 072
(C4) 084
(C5) 096
(C6)