Recovering your system, To recover your system, Recovering pre-installed software and drivers – PACKARD BELL EN BG35 User Manual

Page 47

Advertising
background image

Helpdesk - 47

R

ECOVERING

YOUR

SYSTEM

If the troubleshooting steps (page 36) did not help fix your problem, you can run the Packard Bell Recovery Management
program. This will restore your computer to the same state as when you purchased it, while giving you an option to retain all
settings and personal data for later retrieval.

To recover your system

1. Create recovery discs as soon as you can.

You can use these discs later for recovering your system from significant hardware and software problems. For instructions,
see “Creating recovery discson page 18.

2. Perform minor fixes.

If only one or two items of software or hardware have stopped working correctly, the problem may be solved by reinstalling
the software or the device drivers. To recover software and drivers that were pre-installed at the factory, see “Recovering
pre-installed software and drivers
” on page 47. For
instructions on reinstalling software and drivers that were not pre-
installed, see that product’s documentation or technical support Web site.

3. Revert to a previous system condition.

If reinstalling software or drivers does not help, then the problem may be solved by returning your system to a previous
state when everything was working correctly. For instructions, see “Returning to a previous system conditionon page 48.

4. Reset your system to its factory condition.

If nothing else has solved the problem and you want to reset your system to factory condition, see “Returning your system
to its factory condition
” on page 49.

Recovering pre-installed software and drivers

As a troubleshooting step, you may need to reinstall the software and device drivers that came pre-installed on your
computer from the factory. You can recover using either your hard drive or the backup discs you have created.
• New software - If you need to recover software that did not come pre-installed on your computer, you need to follow that

software’s installation instructions.

• New device drivers - If you need to recover device drivers that did not come pre-installed on your computer, follow the

instructions provided with the device.

To recover your pre-installed software and drivers:

1. Click on Start

>

All Programs > Packard Bell, then click on Packard Bell Recovery Management. Packard Bell

Recovery Management opens.

- OR -
If you are recovering from your driver and application recovery disc, insert it into the disc drive, then go to Step 3 after the
Packard Bell Application Recovery main menu opens.
2. Click on the Restore tab, then click Reinstall applications/drivers. The Packard Bell Application Recovery main menu

opens.

H

E L P D E S K

Advertising
This manual is related to the following products: