1000base-lx expansion module – Enterasys Networks X-Pedition 2000 User Manual

Page 32

Advertising
background image

Hardware Overview

16

Enterasys X-Pedition 2000 Getting Started Guide

1000BASE-LX Expansion Module

The 1000BASE-LX expansion module provides the same features as the 1000BASE-SX expansion
module, and supports both single-mode fiber (SMF) and MMF.

Figure 5

shows the front panel of

the 1000BASE-LX expansion module.

Figure 5. Front panel of 1000BASE-LX expansion module

Per-port AN

Green – indicates that the expansion module is autonegotiating the
operating mode of the link between full-duplex and half-duplex.

Orange (intermittent) – indicates that autonegotiation is in process.

Orange (solid) – indicates a problem with autonegotiation configuration.

Red – indicates an autonegotiation failure. This fault may occur if the
link partner does not support full duplex.

Off – indicates that autonegotiation has been disabled or the link is
down.

Table 10. 1000BASE-SX expansion module LEDs (Continued)

LED

Description

2

1

Rx

Tx

Link

AN

Rx

Tx

Link

AN

1000BASE-LX

G2M-GLXA9-02

Gigabit port

Gigabit port

Advertising