Enterasys Networks X-Pedition 2000 - Manual (Page 46)

Installing the Hardware
30 Enterasys Xpedition 2000 Getting Started Guide
Figure 13. EMI extended face plate
Figure 14. Installing the EMI extended face plate (view from inside chassis)
6. Insert the 1000BASE-SX or 1000BASE-LX gigabit expansion module from the top and ensure
that it makes maximum surface contact with its face plate.
7. Line up the two screw holes at the back of the expansion module and connect
the stacking connector at the back of the expansion module to the pins on the
XP-2000’s motherboard.
Front of XP-2000
Align Slots Over
Stand-offs on
Mother Board.
Additional
Screw Hole
on Face Plate