Eclipse - Fujitsu Ten AVN6600 - Manual (Page 129)

129
O
p
ti
onal
fu
nc
tio
n
• The range of the image may vary depending on the vehicle and the road
conditions.
• There is a limit to the range of the camera. Objects near the ends of the bumper
and under the bumper cannot appear.
• The rear image color may vary from the actual objects.
• The image brightness and contrast can be adjusted. (Refer to "Adjusting/
setting the screen" in the OPERATION GUIDE/ Audio.)
• Depending on the vehicle, the back guideline may appear misaligned on the left
and right. This is not a malfunction.
• In the following situations, the screen may be difficult to view but does not
constitute a malfunction.
• In a dark area (such as at night)
• The temperature near the camera is high or low
• Raindrops are on the camera lens or the humidity is high (when raining)
• A foreign object is near the camera (such as mud)
• When the sun or a beam from headlights strikes the camera lens directly
• When a high-luminance point strikes the camera (such as the reflection of the
sun's rays on the chassis), a Smear effect* typical of CCD cameras may
occur.
[Screen condition]
*Smear effect: A phenomenon where a
vertical line appears from a
high-luminance point striking
the camera (such as the
reflection of the sun's rays on
the chassis).
High-luminance point