Setting the average speed, Route guidance – Eclipse - Fujitsu Ten AVN6600 User Manual
Page 88
88
5. Route guidance
Navigation guidance
The following times are calculated based on the set average vehicle speed.
• Required time on the present location screen (Page 14)
• All route display screen required time (Page 67)
• Required times for the segments list (simultaneous 3 route display) (Page 73)
Touch
in the Menu
screen.
Touch
for
the
Estimated Travel Time.
Set the speed for each road.
• Touch
to raise the speed, touch
to
lower it. (Each press raises or lowers 5
mph.)
Touch .
Setting the average speed
Setup
Set Speed
OK
• The required time is calculated from the average vehicle speed and may have a
slight deviation depending on the driving conditions.
• When deviating from the set route, the
destination direction mark will appear.
• When reaching the maximum speed (75 mph freeway, 55 mph main streets, 25
mph residential), the
switch inverts. When reaching the minimum speed (5
mph), the
switch inverts. These switches cannot be operated even if
touched.
• Touch
on the Change Speed screen to return to its default settings
(Freeway;55 mph / Main street; 35 mph / Residential; 25 mph).
Default