Eclipse - Fujitsu Ten AVN6600 - Manual (Page 35)

35
Ba
si
c
opera
tio
n
POI vicinity display
When a POI vicinity is displayed in the screen on the left, you can switch it either ON (display)
or OFF (not display) to appear on the right screen.
Please refer to the POIs that can be displayed on "POI display" on page 36.
■ Show POI Icons: ON

Touch .
• The actuation right is lit and turns
"Show POI Icons" to ON.
■ Show POI Icons: OFF

Touch while the
Actuation right is lit.
• The actuation right is off and turns
"Show POI Icons" to OFF.

Touch when a map is displayed on the screen.

Touch .
• The pressed touch switch will become
brighter and the monitor will return to
single screen display.
Movement display light
Show POI Icons
Show POI Icons
Canceling the double screen display
• When a POI vicinity is displayed, the settings in the screen on the left and right
are the same. However, POIs not displayed on the left screen cannot be shown
on the right screen.
• If re-displaying the double screen, the reduction scale for the maps shown will
be the same as the previous double screen display scales.