Accuracy and error, Positioning accuracy, Gps signal quality and reception conditions – Eclipse - Fujitsu Ten AVN6600 User Manual

Page 136

Advertising
background image

136

Helpful tips

3. Accuracy and error

Positioning accuracy

The GPS is a very accurate satellite controlled by the U.S. Department of Defense. Errors
may result due to the occurrence of a multipath caused by reflections off buildings or other
structures.

GPS signal quality and reception conditions

Any obstruction coming between the satellite and the GPS antenna will disrupt signal
reception from the satellite.

Also, 3 or more signals must be received simultaneously to enable positioning. When driving
along locations such as those shown below, GPS positioning is not possible.

In addition, obstructions placed on or near the GPS antenna (such as a load) will disrupt
signals from the satellite.

Underground, in a tunnel or

in an indoor parking structure

Surrounded by obstructions

such as tall buildings

In a building

Densely wooded areas

Under an elevated road

On a cliff side road or

at a cavern opening

• Because the GPS satellite orbits the earth, signal reception conditions may vary

depending on the position of the satellite even if driving in the same area. Signals from a
satellite orbiting near the horizon are more likely to be obstructed.

• The GPS satellite is controlled by the U.S. Department of Defense and can be

deliberately made to lose positioning accuracy.

Advertising