Canon EOS 1D X Mark II - Manual (Page 95)

95
Responding to Error Messages
What to check on the FTP server
Is the FTP server working correctly?
X Configure the computer correctly to function as an FTP server.
X If applicable, ask your network administrator for the FTP server
address and port number, then enter them on the camera.
Is the power of the FTP server on?
X Turn on the FTP server. The server may have been turned off
because of an energy-saving mode.
On the camera, does the FTP server’s IP address setting (in
[Address]) match the server’s actual address?
X Configure the IP address on the camera to match the actual FTP
server address (p.22).
Is a firewall or other security software enabled?
X Some security software uses a firewall to restrict access to the FTP
server. Change the firewall settings to allow access to the FTP
server.
X You may be able to access the FTP server by setting [Passive
mode] to [Enable] on the camera (p.81).
Are you connecting to the FTP server via a broadband router?
X Some broadband routers use a firewall to restrict access to the
FTP server. Change the firewall settings to allow access to the
FTP server.
X You may be able to access the FTP server by setting [Passive
mode] to [Enable] on the camera (p.81).