Canon IXUS 180 - Manual (Page 75)

75
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
Using Another Access Point
When connecting the camera to a smartphone through the Wi-Fi menu, you
can also use an existing access point.
1
Prepare for the connection.
z z Access the [Waiting to connect] screen
by following steps 1 – 4 in “Adding a
Smartphone” ( = 73 ).
2
Connect the smartphone to the
access point.
3
Choose [Switch Network].
z z Press the [ ][ ] buttons to choose
[Switch Network], and then press the [ ]
button.
z z A list of detected access points will be
displayed.
• Connections require that a memory card be in the camera.
• Once you have connected to devices via the Wi-Fi menu, recent destinations
will be listed first when you access the Wi-Fi menu. You can easily connect
again by pressing the [ ][ ] buttons to choose the device and then pressing
the [ ] button. To add a new device, display the device selection screen by
pressing the [ ][ ] buttons, and then configure the setting.
• If you prefer not to display recent target devices, choose MENU ( = 21 ) ►
[ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Target History] ► [Off].
• To connect without entering a password in step 5, choose MENU ( = 21 )
► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Password] ► [Off].
[Password] is no longer displayed on the SSID screen (in step 4).
• You can also send multiple images at once and change the image size before
sending ( = 89 ).
• You can send the current image by choosing [Send this image] on the screen
in step 9.