Canon IXUS 180 User Manual
Page 88
88
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
•
Connections require that a memory card be in the camera.
•
Once you have connected to devices via the Wi-Fi menu, recent destinations
will be listed first when you access the Wi-Fi menu. You can easily connect
again by pressing the [ ][ ] buttons to choose the device and then pressing
the [ ] button. To add a new device, display the device selection screen by
pressing the [ ][ ] buttons, and then configure the setting.
•
If you prefer not to display recent target devices, choose MENU (
) ►
[ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Target History] ► [Off].
•
You can also send multiple images at once and change the image size before
sending (
•
You can send the current image by choosing [Send this image] on the screen
in step 4.
4
Send an image.
z
z
Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
z
z
Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
z
z
Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
z
z
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
z
z
Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
z
z
[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
z
z
To end the connection, press the
[
] button, press the [ ][ ] buttons
on the confirmation screen to choose
[OK], and then press the [ ] button.