FujiFilm X-M1 - Manual (Page 79)

63
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
Recording Pictures in RAW Format
Creating JPEG Copies of RAW Pictures Creating JPEG Copies of RAW Pictures
RAW pictures store information on camera settings separately from the data captured by the camera
image sensor. Using the
j RAW CONVERSION option in the playback menu, you can create JPEG
copies of RAW pictures using diff erent options for the settings listed below. The original image data
are unaff ected, allowing a single RAW image to be processed in a multitude of diff erent ways.
1 Press MENU/OK during playback to display the
playback menu, then press the selector up
or down to highlight
j RAW CONVERSION
and press MENU/OK to display the settings list-
ed in the table at right.
R These options can also be displayed by pressing
Q button during playback.
2 Press the selector up or
down to highlight a setting
and press the selector right
to select. Press the selec-
tor up or down to highlight
the desired option and press MENU/OK to select
and return to the settings list. Repeat this step
to adjust additional settings.
3 Press the Q button to preview the JPEG copy
and press MENU/OK to save.
Setting Setting Description Description
REFLECT SHOOTING
COND. Create a JPEG copy using the settings in ef-
fect at the time the photo was taken.
PUSH/PULL
PROCESSING Adjust exposure by –1 EV to +3 EV in incre-
ments of 1
/ 3 EV ( P 55).
DYNAMIC RANGE
Enhance details in highlights for natural
contrast (
P 71).
FILM SIMULATION
Simulate the eff ects of diff erent types of fi lm
(
P 61).
WHITE BALANCE Adjust white balance ( P 45).
WB SHIFT Fine-tune white balance ( P 45).
COLOR Adjust color density ( P 71).
SHARPNESS Sharpen or soften outlines ( P 71).
HIGHLIGHT TONE Adjust highlights ( P 71).
SHADOW TONE Adjust shadows ( P 72).
NOISE REDUCTION Process the copy to reduce mottling ( P 72).
CREATE
REFLECT SHOOTING COND.
PUSH/PULL PROCESSING
DYNAMIC RANGE
FILM SIMULATION
WHITE BALANCE
WB SHIFT
RAW CONVERSION
CANCEL