Roland VC-1-DL Bi-Directional SDI/HDMI Video Converter with Delay and Frame Sync - Manual (Page 3)

3
WARNING
001-60
To completely turn off power to
the unit, pull out the plug from the
outlet
• When the power needs to be turned
off, pull out the plug from the outlet.
For this reason, the outlet into
which you choose to connect the
power cord’s plug should be one
that is within easy reach and readily
accessible.
001-70
Concerning the Auto Off function
• The power to this unit will be
turned off automatically after a
predetermined amount of time has
passed since the last input of signal
(AUTO OFF function). If you do not
want the power to be turned off
automatically, disengage the AUTO
OFF function (p. 13).
002c
Do not disassemble or modify by
yourself
• Do not open (or modify in any way)
the unit or its AC adaptor.
WARNING
003
Do not repair or replace parts by
yourself
• Do not attempt to repair the unit,
or replace parts within it (except
when this manual provides specific
instructions directing you to do so).
Refer all servicing to your retailer,
the nearest Roland Service Center,
or an authorized Roland distributor,
as listed on the “Information” sheet.
004
Do not use or store in the following
types of locations
• Subject to temperature extremes
(e.g., direct sunlight in an enclosed
vehicle, near a heating duct, on top
of heat-generating equipment); or
are
• Damp (e.g., baths, washrooms, on
wet floors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration
and shakiness.
USING THE UNIT SAFELY