Roland VC-1-DL Bi-Directional SDI/HDMI Video Converter with Delay and Frame Sync - Manual (Page 14)

14
Front Panel
fig.front-panel.eps
1 2 3 4 5
For information on what the colors and the lighted and flashing states of the indicators mean,
refer to “Indicator Colors/Operation” (p. 16).
1. SDI IN Connector and Indicator
Connect a video camera or other SDI source equipment.
2. SDI OUT Connector and Indicator
Connect a video deck, monitor, or other SDI output device.
3. REF IN Connector and Indicator
Connect a clock source device for synchronization.
* It is possible to use this unit as a frame synchronizer when supported sync signal is input (p. 20).
4. AUDIO IN Connectors and Indicator
Connect a mixer or other audio sources. You can use the mode switches (MODE SW)
to switch between analog input and AES input (p. 23).
* The VC-1-DL can output video and audio together (embedded audio feature).
5. USB Port
Connect a computer used for remote control.
* Operating the VC-1-DL by remote control requires downloading dedicated software (VC-1
RCS) and installing it on a computer. You can download the dedicated software from the
following Roland website.
http://www.rolandsystemsgroup.net/
Names of Things and What They Do