Roland AIRA VT-4 Voice Transformer - Manual (Page 11)

11
Appendix
Effect Variation List
Effect button (hold down) +
scene memory button
Effect variation
[ROBOT]
[1] NORMAL
[2] OCTAVE -1
[3] OCTAVE +1
[4] FEEDBACK
[MEGAPHONE]
[1] MEGAPHONE
[2] RADIO
[3] BBD CHORUS
[4] STROBO
[VOCODER]
[1] ADVANCED
[2] VP
[3] TALK BOX
[4] SPELL TOY
[HARMONY]
[1] +5
[2] +3
[3] +3, -4
[4] +3, +5
[BYPASS] (reverb)
[1] REVERB
[2] ECHO
[3] TEMPO DELAY
[4] DUB ECHO
MEMO
You can hold down an effect button to see the currently selected
effect variation (the scene memory button blinks).
Installing Batteries
As an alternative to USB bus power, you can use commercially available
AA nickel-metal hydride batteries or alkaline batteries to power the unit.
* If USB bus power is being supplied, the unit uses USB bus power
even if batteries are installed.
1. Remove the battery cover.
* When turning the unit over, be careful so as to protect the buttons
and knobs from damage. Also, handle the unit carefully; do not
drop it.
2. Taking care to observe the correct orientation of the
batteries, insert the batteries into the battery case.
3. Close the battery cover.
* If you handle batteries improperly, you risk explosion and fluid
leakage. Make sure that you carefully observe all of the items related
to batteries that are listed in the leaflet “USING THE UNIT SAFELY.”
Battery replacement indicator (PEAK indicator)
When the batteries run low, the PEAK indicator blinks rapidly. When this
occurs, install new batteries.