Extreme Networks 200 Series - Manual (Page 276)

274 Summit 200 Series Switch Installation and User Guide
Using ExtremeWare Vista on the Summit 200
The Configure VLAN Ports area of window allows you to remove VLAN ports or to change ports back
and forth from tagged-based to port-based.
Figure 67 shows an example of the Configure VLAN Information.
Figure 67: VLAN Administration (2 of 2)
Reviewing ExtremeWare Vista Statistical Reports
ExtremeWare Vista offers a number of pre-formatted reports on the most frequently requested
information. These statistical reports provide current information about the switch and its configuration.
To access the statistical reports, click Statistics in the task bar to reveal the submenu links. The
following links appear in the submenu:
Event Log —Contains system event log entries
FDB —Contains Forwarding Database entries
IP ARP —Contains the entries in the IP Address Resolution Protocol (ARP) table
IP Configuration —Contains the global IP configuration statistics and router interface statistics
IP Route —Contains the IP Route table
IP Statistics —Contains global IP statistics
Ports —Contains the physical port statistics