Sony X85K 55" 4K HDR Smart LED TV User Manual
Page 21
Using the Menu
21
05
MAGNIFICATION
MAGNIFICATION
[OFF]
/ON
For selecting normal display (OFF) or magnified display
(ON).
Normal display (OFF) is selected whenever the power is
turned on.
MAG
POSITION
[CENTER]
/
UPPER/RIGHT/
LOWER/LEFT
For selecting the area to magnify when the magnification
mode is enabled.
The “MAG POSITION” setting is linked to the “POSITION”
setting of the PEAKING PLUS menu.
CENTER:
Magnifies the center area.
UPPER:
Magnifies the upper area.
RIGHT:
Magnifies the right area.
LOWER:
Magnifies the lower area.
LEFT:
Magnifies the left area.
AUTO RELEASE
[AUTO]
/MANUAL
For specifying the manner in which the magnified display
returns to normal display.
AUTO:
After the magnified display appears by pressing
ASSIGN switch, the display returns to normal
automatically after the specified time.
MANUAL:
After the magnified display appears by
pressing ASSIGN switch, the display returns to normal
when ASSIGN switch is pressed again.
06
PRESET
PRESET
[OFF]
/ON
For selecting whether to enable the settings of BRIGHT,
CONTRAST controls and enables the preset “PRST
BRIGHT” and “PRST CONTRAST” values in the PRESET
menu.
OFF:
Enables the preset level that is set by the controls
ON:
Enables the PRESET menu settings
PRESET
SELECT
(Only HDVF-
EL30 is valid.)
[BOTH]
/OLED/
LCD
When “ON” is selected in “PRESET,” select the panel in
which each PRESET value is reflected.
BOTH:
Reflects the PRESET value to both the OLED and
LCD panel.
OLED:
Reflects the PRESET value only to the OLED
panel.
LCD:
Reflects the PRESET value only to the LCD panel.
PRST BRIGHT
–
99 to
[0]
to 99
For setting the image brightness when “ON” is selected in
“PRESET.”
Raising the value increases the brightness of the image.
PRST
CONTRAST
–
99 to
[0]
to 99
For setting the image contrast when “ON” is selected in
“PRESET.”
Raising the value increases the contrast of the image.
07
STATUS DISPLAY ASSIGN 1
OFF/
[ON]
For selecting whether the changes in the status of the
function assigned to the ASSIGN 1 switch is displayed (ON)
or not (OFF).
ASSIGN 2
OFF/
[ON]
For selecting whether the changes in the status of the
function assigned to the ASSIGN 2 switch is displayed (ON)
or not (OFF).
BRIGHT
OFF/
[ON]
For selecting whether the setting of the BRIGHT control is
displayed (ON) or not (OFF).
CONTRAST
OFF/
[ON]
For selecting whether the setting of the CONTRAST control
is displayed (ON) or not (OFF).
PEAKING
OFF/
[ON]
For selecting whether the setting of the PEAKING control is
displayed (ON) or not (OFF).
08
OLED
HIGH EYEPOINT
[OFF]
/ON
Switches between the normal display (OFF) and HIGH
EYEPOINT (ON).
EYE SENSOR
OFF/
[ON]
Set the eye sensor to ON or OFF. Set to “ON” normally.
When set to “OFF,” anti-burn-in to the OLED panel is not
processed and burn-in may occur.
Page
Menu
Item
Settings
(default in
[ ]
)
Function