Sony ICD-PX470 Digital Voice Recorder with USB - Manual (Page 10)

10
When the receiver does not support encryption key
exchange through USB connection, select REMOTE.
For details on the receiver, refer to the operating
instructions supplied with the receiver.
When you select USB:
Connect the microphone to the receiver using a USB
cable (not supplied) and the USB adapter cable
(supplied).
For details on receiver operations, refer to the
operating instructions supplied with the receiver.
When you select REMOTE:
The microphone searches for a receiver that it has been
paired with. After the microphone detects the receiver,
the microphone exchanges the encryption key with
receiver and encrypted transmission begins.
Using Password Mode (PASSWORD)
Set this mode when multiple microphones/transmitters are
paired with multiple receivers for encrypted transmission.
If both microphones/transmitters and receivers are set with
the same user-designated password, the audio signal can
be decoded. This mode is useful when multiple
microphones/transmitters and receivers are used as a
single group, or when the audio signal from one
microphone/transmitter is received by multiple receivers
at the same time.
1
Hold down the SET button until the item to be set
flashes in the ENCRYPTION indication on the
microphone.
2
Press the + or – button repeatedly to select
PASSWORD, and then press the SET button.
3
Input a password of up to eight characters on the
microphone.
To enter a password, use the procedure described in
“Naming of Microphone (NAME)” on page 12.
4
Set the encrypted transmission function setting on the
receiver to PASSWORD.
5
Set the same password that was set on the microphone.
For details on receiver operations, refer to the
operating instructions supplied with the receiver.
It is recommended that you change the password
periodically.
Note
USB cable (not supplied)
USB adapter
cable
(supplied)
Note