Power supply, Installing the batteries – Sony ICD-PX470 Digital Voice Recorder with USB User Manual

Page 5

Advertising
background image

5

F

POWER switch lock indicator

Indicates that the POWER switch is locked, preventing the
microphone from being accidentally turned off or on.

For details, see “Locking the POWER Switch (POWER
SW LOCK)” on page 14.

G

Cross Remote condition indication

Indicates the signal transmission condition of the wireless
remote control function (4 levels).

: Good transmission
: Somewhat good transmission
: Somewhat poor transmission
: Poor transmission
: Unable to communicate with paired receiver

When the wireless remote control function is off, this
indication does not appear.

H

Battery indication

Shows the battery condition.

For details, see “Battery indication” on page 5.

I

Menu display section

The status of 17 different functions are displayed here. To
select the function, press the + or – button repeatedly.

For details, see “Setting Menus” on page 12.

j

POWER switch

Turns the microphone ON or OFF.

k

Battery compartment

Accommodates two LR6 (size AA) alkaline batteries.

For details on how to insert the batteries, see “Power
Supply” on page 5.

Power Supply

The microphone can operate on two LR6 (size AA)
alkaline batteries continuously for about 5 hours at 25 °C
(77 °F).

Installing the Batteries

1

Turn the grip in the direction of the arrow, and pull
down the grip until the battery compartment is shown.

2

Insert two new LR6 (size AA) alkaline batteries,
making sure the polarities are correct.

To prevent the batteries from touching each other,
push in the second battery against the spring tension.
Squeezing the batteries into the compartment while
two batteries are touching may damage the battery
packages.

3

Close the grip and turn it in the reverse direction in the
step

1

above.

Battery indication

The power status is indicated by eight level indications.
Replace both batteries when the battery indication starts to
flash.
Be sure to check the expiration date printed on the new
batteries before using them.

• When BATTERY TYPE is set to TYPE1, the power

status is indicated based on the use of new LR6 (size
AA) Sony Alkaline batteries. An incorrect indication
may result when a different kind of batteries, a different
brand of batteries or old batteries are used. If you plan to
use other kind of batteries than alkaline, set the
BATTERY TYPE function according to the type of
batteries to be used.

Note

Notes

Advertising
This manual is related to the following products: