Nikon 4804 R1 Wireless Close-Up Speedlight System - Manual (Page 55)

55
z
Functions a
nd use of the SU-800
2
Using the SU-800
1 Slide open the battery chamber lid
in the direction of the arrow.
2 Install the battery, then close the
battery chamber lid by sliding it into
place.
Use CR123A (3V) lithium batteries.
Replacing the battery
The low battery-power indicator blinks
when the SU-800’s ready-light does not
come on within about 30 seconds of the
power being turned on or after the flash
has fired.
• Replace the battery.
3 Turn off the camera and SU-800.
ON/OFF