Planar Systems LO552 55" Full HD Transparent OLED Commercial Monitor - Manual (Page 13)

Planar LookThru Transparent OLED Display User Manual
020-1380-00E
Page | 13
Tour of the Planar LookThru Transparent OLED Product Family
Note there is no fan in any of the Planar LookThru family of displays.
The Straight Mount Model, the Planar LookThru LO552-S, on
the right, is intended to allow mounting on a wall or partition
where space behind the Display Chassis is an issue. Like the
Standard Model, the Planar LookThru LO552-S can be used in
the tiled configuration. The Planar LookThru LO552-S differs
from the Standard Model in that the electronic box has been
relocated 90
º downward compared to the Planar LookThru
LO552. It is functionally identical to the Planar LookThru
LO552. The Planar LookThru LO552-S can be mounted in
upright or inverted in landscape mode or in either orientation in
portrait mode. A corner installation of multiple Planar LO552-S
displays is also possible.
Note that the Straight Mount Model is not intended for standalone use; it can only be
used when attached to a support structure.
The primary mounting points on the Display Chassis must be employed for attachment.
The secondary mounting points on the electronic box can also be used, but only along
with the primary points.