Important safety instructions, 2 important safety instructions – Planar Systems LO552 55" Full HD Transparent OLED Commercial Monitor User Manual
Page 8
Planar LookThru Transparent OLED Display User Manual
020-1380-00E
Page | 8
Introduction
1.2 Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use Planar LookThru displays outdoors or near water.
6. Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus that produce heat.
7. Do not defeat the safety purpose of a polarized or grounding type plug. The
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for safety. When the provided plug does not fit into an outlet, consult an
electrician for the replacement of the obsolete outlet.
8. Protect the power cord(s) from foot traffic or kinks particularly at plugs, convenience
receptacles and the point where they exit from any of the Planar LookThru displays.
9. Use only replacement parts, accessories and other components specified by Planar
Systems.
10. Unplug all Planar LookThru displays during lightning storms or when unused for long
periods of time.
11. Follow all National Electrical Code regulations. In addition, be aware of local codes
and ordinances when installing the system.
12. Refer all servicing to qualified service personnel. Servicing is required when any
Planar LookThru displays have been damaged in any way, such as when the AC
power cord or plug is damaged, liquid has been spilled or objects have fallen into a
product, the products have been exposed to rain or moisture, do not operate
normally or have been dropped.
13. Consider keeping the packing materials in case the equipment ever needs to be
shipped.
14. Wall mounts must be secure. The wall must be strong enough to hold all Planar
LookThru displays, mounting plates, cables and accessories. Weights and
dimensions of components of the display are found in the
“Specifications” section on
page 65.