Planar Systems LO552 55" Full HD Transparent OLED Commercial Monitor - Manual (Page 50)

Planar LookThru Transparent OLED Display User Manual
020-1380-00E
Page | 50
Navigating Through the Menus
25.2 System Settings Submenu
Enable Status LED

Turns on status LEDs
Pixel Orbit

Turns on pixel orbit. This moves the entire screen randomly by up to 10 pixels to
lessen the onset of burn in.
Inverted Mount

Rotates the OSD when an inverted mount is used
IR Remote Code

Identifies the remote code address used. Refer to the IR Command Protocol section
DisplayPort Type

Set the version of DisplayPort that is used by the system

Options: 1.1, 1.2; Default: 1.2
Keypad Lock

Lock or unlock the keypad. When it is enabled, all keypad presses will be ignored.

Options: Enable, Disable; Default: Disable
IR Remote Lock

Lock or unlock the remote control. When it is enabled, all remote control presses will
be ignored.

Options: Enable, Disable; Default: Disable
Factory Reset

Return the saved settings in a system to their factory defaults
Firmware Update

Update the firmware for the display. Refer to the instructions on the firmware release
package for more information.