Christie M Series WU14K-M WUXGA 3DLP Projector (No Lens) User Manual
M series
Advertising
Table of contents
Document Outline
- Content
- Introduction
- Operating the projector
- Controlling the projector
- Logging on to the projector
- Managing users
- Navigating the web user interface
- Uploading a logo file
- Setting the power management parameters
- Configuring the lens
- Configuring the lamp
- Configuring the HDMI output options
- Looping video signals
- Performing diagnostics and calibration
- Managing channels
- Using multiple projectors
- Displaying picture-in-picture
- Adjusting the image
- Monitoring and maintaining the projector
- Backing up the configuration and preferences
- Restoring a backup file
- Performing a diagnositic test using interrogator
- Monitoring the projector status
- LED and key states
- Maintaining the cooling system
- Maintaining the optics
- Troubleshooting
- Projector does not power on
- Lamp does not ignite
- Lamp suddenly turns off
- Flicker, shadows, or dimness
- Black LCD screen, no menu displays
- Remote keypad does not seem to work
- The on-screen display menu does not display
- Cannot establish communication with projector
- The projector is on, but there is no display
- Severe motion artifacts
- Image is vertically stretched or squeezed
- Display is jittery or unstable
- Display is faint
- The upper portion of the display is waving, tearing, or jittering
- Portions of the display are cut off or warped to the opposite edge
- Display appears compressed or vertically stretched
- Data is cropped from the edges
- Display quality appears to drift from good to bad, bad to good
- Display suddenly freezes
- Inaccurate display colors
- Display is not rectangular
- Display is noisy
- After a projector software upgrade, the Web UI does not display correctly
- A backup or interrogator file cannot be saved
- DMX/ArtNET