EXP Computer PathBuilder S200 - Manual (Page 135)

Bridging 131
T0008-16F Release 5.2M
Bridge Statistics
Active Filters:
MAC Address
• MAC Address: 6-byte value of MAC
Address parameter from the MAC Filter
Table.
• Source In: Value (PASS or BLOCK) from the
MAC Filter Table. Action to be taken on an
inbound frame having the indicated MAC
Source address.
• Source Out: Value (PASS or BLOCK) from
the MAC Filter Table. Action to be taken on
an outbound frame having the indicated
MAC Source address.
• Destination In: Value (PASS or BLOCK)
from the MAC Filter Table. Action to be
taken on inbound frame for the indicated
MAC Destination Address.
• Destination Out: Value (PASS or BLOCK)
from the MAC Filter Table. Action to be
taken on outbound frame for the indicated
MAC Destination address.
Active Filters:
Protocol Class
• Protocol Class: Value (DSAP or SNAP) of
Protocol Class parameter of a Protocol Filter
Table.
• Value: Represents the value of the Protocol
parameter of a Protocol Filter Table. This
value can be 1 byte (DSAP) or 5 bytes
(SNAP), depending upon which type of
protocol is involved in the frame.
• Incoming: Value (PASS, BLOCK) from the
Protocol Filter Table. Action to be taken on
outbound frame for the indicated protocol
value.
• Outgoing: Value (PASS, BLOCK) from the
Protocol Filter Table. Action to be taken on
outbound frame for the indicated protocol
value.
Note
This screen can be several pages long depending on configuration.
Term (continued) Description