EXP Computer PathBuilder S200 - Manual (Page 85)

Bridging 81
T0008-16F Release 5.2M
Bridge Filtering
Typical Filtering For the typical case, where you filter client broadcast traffic by default and pass
server traffic as discussed in the ““Typical Filtering” section on page 81.”
• Define only the NetBIOS Name field.
• Define one record for each wildcard pattern that encompasses all NetBIOS
service names.
Parameters These parameters make up the NetBIOS Name Filter Table record:
String Type
Range: ASCII, Hex
Default: ASCII
Description: This parameter determines how you enter the 16-character
NetBIOS name for this record. ASCII means that you enter ASCII
characters for the name. The name is left-justified, blank filled to
the 15th byte, and the 16th byte is ignored. Hex means that you
enter hexadecimal values for up to all 16 bytes. The string is
left-justified and the remaining bytes are ignored.
NetBIOS Name
Range: 0 to 16 ASCII characters (if parameter String Type=ASCII). Blank
set to null.
2 to 32 hexadecimal digits (if parameter String Type=hex)
Default: <blank>
Description: This name string is matched against NetBIOS packets. ASCII-type
strings are case-sensitive. They may contain the wildcard
character “?” that matches any character, or “*” as the last
character that matches all remaining characters. Hex type strings
may contain the sequence “**” for a byte position to indicate a
wildcard match of any byte value.