EXP Computer PathBuilder S200 - Manual (Page 26)

22 Bridging
Configuring the PathBuilder S200 Series Switch for Bridging Operation
Bridge Parameters
Bridge Port Record
Parameters After you configure the Node record and the LAN Port record for the bridge node,
configure the Bridge parameters. Figure 14 shows the parameters that make up the
Bridge Parameters record.
Figure 14. Configure Bridge Parameters
Parameters These parameters make up the Bridge Parameter Record.
Node: Address: Date: Time:
Menu: Configure Bridge Path:
Bridge Parameters
*Max Number of Bridge Links
*STPE Control
Bad Hello Threshold
Bad Hello Timeout
Learn Only Period
Aging Period
Bridge WAN Data Priority
Bridged Protocols
Local Bridge ID
*Maximum Number of Bridge Links
Range: 36 to 250
Default: 36
Description: Specifies the maximum number of bridge links allowed.
Boot Type: A change to this parameter requires a Node boot to take effect.