Kiloview 3G-SDI to H.264 Wireless Video Encoder User Manual
Page 12
Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
G1-s VideoEncoders · User Manual
8
In addition to the way of DHCP, the encoder also supports manual IP assignment. To change the IP of the
wired network, click “Configure” button in the Ethernet to enter the interface for conf
iguring the IP.
There are two ways to get the address, one is DHCP, and the other is to manual. To use DHCP to
automatically obtain IP, you must first ensure that the router or switch has enabled the DHCP service.
This method is simple and convenient, but the IP obtained by DHCP changes continuously, and you
cannot directly know what IP address the encoder gets. To use manual, you need to enter a fixed IP to
the encoder, and this IP address is fixed as long as the encoder does not restore the factory settings, this
method is more stable. Therefore, the two methods have their own advantages, and can be selected
accordingly.