Kiloview 3G-SDI to H.264 Wireless Video Encoder - Manual (Page 46)

Version 1.0 © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
G1-s VideoEncoders · User Manual
53
6.8.3 Telnet Service Configuration
Telnet service listens on port 23 for remote connection and debugging of devices. For security reasons,
you can choose to close telnet services.
6.9 Serial Ports and PTZ
6.9.1 Serial Ports
With USB to RS232/RS422/RS485 adaptor (cable), after connecting to USB port, if the device and
identify the serial po
rt correctly, USB port will be listed at “ D evice”, then you can set the corresponding
serial port parameters .
Note ： The encoder can automatically identify the USB serial port conversion device of universal
USB to Serial/FDTI chip/PL2303 chip. If the USB to RS232/RS422/RS485 converter (line) you inserted
cannot be recognized and the converter chip is not supported by default, please replace the serial
line.