Kiloview 3G-SDI to H.264 Wireless Video Encoder - Manual (Page 32)

Version 1.0 © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
G1-s VideoEncoders · User Manual
39
6.4.3.4 TS-UDP Pushing (unicast and multicast)
Click to select TS-UDP Pushing, then entering into TS-UDP setting interface.
TS-
UDP pushing divides into unicast and multicast. If using unicast, “pushing target address” is device IP
address of receiving TS streaming. “Target port” is any port, bu t it is better not conflicted with other
service port. No need to change Multicast TTL; If using multicast, “pushing target address” needs to
write a correct multicast address (224.x.x.x ~ 239.x.x.x). “Target port” is any port, but it is better not
conflicted with other service port.