Kiloview 3G-SDI to H.264 Wireless Video Encoder - Manual (Page 22)

Version 1.0 © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
G1-s VideoEncoders · User Manual
29
1. Via the WEB interface, "Basic Setup > restore factory settings" function;
2. Through RESET button:
On the dashboard, there is a button of . Pressing on RESET button for 3 seconds, device will restore
factory settings. Restoring factory setting will lead to the device hard restart, restarting course will last 1
minute.
Please note: after restoring factory setting, below parameters will be changed to default value:
●Login username and password will be admin;
●IP address will be restored as 192.168.1.168; subnet mask will be 255.255.255.0;
● All encoding parameters of video and audio will be restored to factory default value;
● Media transmission parameters will be re stored as factory default value.
6.2.4 Firmware upgrading
The encoder supports online firmware upgrading. Through the “Basic Settings - Firmware Upgrade” of
the Web page, users can upload the firmware online. Click “Select Files” to select the upgrade file, and
c lick “ Upgrade ” to upgrade the device. The upgrade process is slow, around 30s to 1 minute, please be
patient.