Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 573)

2. Right-click (on macOS: [Ctrl]+click) the Event area’s background and choose Copy from
the slot’s context menu:
3. Select the Group in which you want to paste the Pattern’s content.
4. Open the Pattern Manager, select (or create) an empty Pattern, and close the Pattern
Manager again.
The selected (or created) Pattern appears in the Pattern Editor.
5. Right-click (on macOS: [Ctrl]-click) the Event area’s background and choose Paste from
the context menu to paste the Pattern.
If events are selected in the Pattern, the copy/paste operation will apply to these events only! See
↑ 11.7.1, The Pattern Manager and Pattern Mode for more on this.
Duplicating, Copying, and Pasting Patterns on Your Controller
While the duplicating method described above is the quickest one, you can also copy a Pattern
to the Pattern slot of your choice via the
DUPLICATE button of your controller:
1. Press and hold PATTERN to enter Pattern mode (you can pin it by pressing Button 1).
2. Press and hold DUPLICATE (you can also pin it by pressing Button 1).
3. Press the pad of the Pattern you want to copy.
The pad starts flashing.
4. Press the target pad for the Pattern copy.
Working with Patterns
Managing Patterns
MASCHINE - Manual - 573