ENG Electric UNIDISK SC PLAYER User Manual

Page 13

Advertising

Standby mode

To toggle between standby mode and operation mode:

Using the handset

●

Press the key.

Using the front panel

●

Press and hold the key.

Note: Pressing any key on the front panel will bring the unit out of standby

Video Output

In order to set up your UNIDISK SC you must first
ensure that the unit is outputting the correct video
signal type for your display device.

To do this:

●

Press and hold DISP (display) on the handset.
The current setting for the output video format is
shown on the front panel display. To change the
video format, press

or . The options available

are PAL, NTSC, and Native (for display devices
that accept both PAL and NTSC).

●

Press DISP again. The current setting for the video scan mode is shown on the
front panel display. To change the video scan mode, press

or . The options

available are INTERLACED (for display devices that accept an interlaced signal)
and PROGRESSIVE (for display devices that accept a progressive signal). If your
display device accepts both types, select PROGRESSIVE as this setting provides
better picture quality.

After a few seconds the front panel display will change to its previous display.

Setup Menus

About the setup menus

The on-screen setup menus enable you to configure your UNIDISK SC to suit the
requirements of your display device, the speakers in your AV system and much more. It
is essential that you use the setup menus to inform the UNIDISK SC about components
that it is connected to. Please take the time to configure your UNIDISK SC correctly.

The menus are divided into seven categories:

General Setup
For configuring the general audio and video setup of the unit.

Speaker Setup
For configuring the unit to the number, size and position of your loudspeakers.

Progressive Scan Setup
For configuring the progressive outputs on the unit, if used.

HDMI Setup
For configuring the HDMI output on the unit, if used.

Video Source Setup
For configuring the video output of the unit.

Audio Setup
For configuring the audio output of the unit.

Preferences
For setting up additional features such as subtitles and parental control. (This category
cannot be accessed if there is a disc playing in the unit.)

Note:
The setup menus can be accessed when a disc is playing in the unit (bar the Preferences
menus, see above) unless the disc is a DVD-Audio.

Video Output / Setup Menus

DVD TV

T U N E R

STORE

ADJUST

SHIFT

DISP

GOTO

TITLE

RETURN

SETUP

PRESET

TUNE

AUDIO

SUB-T

ANGLE

ZOOM

SCAN

ALL

ONE

A - B

RANDOM

SHUFFLE

INTRO

INCLUDE

EXCLUDE

RECORD

SIGNAL

BAND

MONO

DVD

SURR

DISP

English

UNIDISK SC PLAYER

Owner’s Manual

U N I D I S K S C

SELECT