Euro-Pro 9110 - Manual (Page 18)

WINDING THE BOBBIN
WINDING THE BOBBIN
13
6.
will display the animation of bobbin winding,
press the engaging lever to right, the animation
disappear, LCD display the frame of ordinary
operating.
When the bobbin winder switch is pressed to the left,
LCD
7. Hold the thread tail securely in one hand.
8. Press the Start/stop button or foot control.
9. After the bobbin has wound a few turns stop the
machine and cut the thread near the hole of the
bobbin. Set the speed to maximum. Continue filling
the bobbin until it is full. The motor stops automatically
when the bobbin is full.
6
7
9
8
10.Stop the machine, cut the thread and then remove the
bobbin.
10
Please Note: When the bobbin winder switch is placed on the left, "bobbin winding
position", the machine will not sew and the handwheel will not turn. To start sewing, push
the bobbin winder switch to the right "sewing position".