Euro-Pro 9110 - Manual (Page 58)

It is easier to guide the fabric and you have a
better view of the seam when using the
standard, regular foot on your machine. Your
sewing machine offers excellent stitch quality
on a wide range of fabrics from delicate
chiffons to multiple layers of denim.
53
WALKING FOOT
WALKING FOOT
1
2
a
b
c
3
4
Please Note: Always try to sew first without the walking foot
accessory which should be used only when necessary.
The Walking Foot accessory equalizes the
feeding of the upper and lower layers of fabric
and improves the matching of plaids, stripes
and patterns. It also helps to prevent uneven
feeding of very difficult fabrics.
1. Lift the presser foot lifter to raise the
presser foot bar.
2. Remove the presser foot holder by
unscrewing (counterclockwise) the presser
bar attaching screw.
3. Attach the Walking Foot to the machine as
follows:
- The arm (a) should fit into above the
needle screw and clamp (b).
- Slide the plastic attaching head (c) from
your left to right so that it is fitted into the
presser foot bar.
- Lower the presser foot bar.
- Replace and tighten (clockwise) the
presser bar attaching screw.
- Make sure both the needle screw and the
presser bar attaching screw are tightly
secured.
4. Draw the bobbin thread up and place both
the bobbin thread and the needle thread
behind the walking foot attachment.