Euro-Pro 9110 - Manual (Page 69)

WARNING FUNCTIONS
WARNING FUNCTIONS
64
- When operating correctly: 1 beep
- When the memory is full 20 units of pattern: 2-short beeps
- When operating incorrectly: 3-short beeps
- When the sewing machine is in trouble and can't sew: 8 seconds short beeps
It means that the thread is twisted or jammed and the hand wheel axle can't move. Please look
through the "Trouble shooting guide" on page 69/70 to find the solution. After the problem has
been solved, the machine will continue to sew.
Warning beeping sound
Please Note: If the problem is still not solved, please contact your local dealer.
Attention: During the sewing, if the thread get jammed inside the hook stopping the
needle from moving and you continue pressing the foot control, the security switch will
stop the machine completely. In order to restart the sewing machine, you will have to
turn the on/off switch to the OFF position and then ON again.
Instruction animation message display
Bobbin winding
The bobbin winder is winding the bobbin.