Euro-Pro 9110 - Manual (Page 22)

USING THE NEEDLE THREADER
USING THE NEEDLE THREADER
2. The needle threader automatically turns
to the threading position and the hook pin
passes through the needle eye.
3. Take the thread in front of the needle.
4. Hold the thread loosely and release the
lever slowly. The hook will turn and pass
the thread through the needle eye forming
a loop.
Pull the thread through the needle eye.
3
Raise the needle to its highest position
and lower the presser foot.
1. Lower the needle threader lever slowly
and draw the thread through the thread
guide as illustrated and then to the right.
Attention: Turn power switch to the off
position ("O").
17
1
2
4