Euro-Pro 9110 - Manual (Page 41)

3. Select the buttonhole stitch. Adjust the
stitch width and the stitch length to the
desired width and density.
4. Position the fabric under the presser foot
so that the centerline's mark is aligning with
the center of the buttonhole foot.
Lower the buttonhole lever, then push it to
the back.
Please Note: When you select any
buttonhole pattern, LCD screen will be
demonstrated the
, it is to remind you to
lower the buttonhole lever.
warning animation
message display
Starting
point
3
BUTTONHOLE STITCHING
BUTTONHOLE STITCHING
PUSH
4
PUSH
5. While lightly holding the end of upper
thread and start sewing.
Please Note: Gently feed the fabric by
hand. Before stopping, the machine will
automatically sew a reinforcement
stitch after the buttonhole is sewn.
5
PUSH
36
NOTE Make no
gap here