Bushnell NatureView HD Essential Trail Camera (Green) - Manual (Page 31)

31
PLAYING BACK/DELETING THE PHOTOS/
VIDEOS
After you have setup, mounted and activated your NatureView HD Cam,
you will of course be eager to return later and review the images it has
captured for you. There are several different ways this can be done.
Reviewing Images Directly From the SD Card
This is the most popular method of viewing images. Since unmounting the
camera and taking it to your computer isn’t very convenient, you may find it
easier to just take the card out. By removing the SD card (swapping it for a
new empty card if you like) and taking it to your home or campsite to view
the images by using an SD card “reader”
(user supplied) connected to your
computer (some computers and TVs have a built in SD card slot), you can
leave the camera in place ready to capture more images. Once connected,
the card reader works the same way as described below-please read that
section if you have any problem finding your files.
Reviewing Images Using the Color Viewer:
First, set up and connect the included handheld Color
Viewer as described on
pg. 29 . A TV monitor or other
viewing device with a standard composite video input
(RCA jack) can also be used by connecting it to the A/V
Out jack. Switch the camera to OFF, then to SETUP.
Next:
• Press the Replay (OK) key.
• Press the UP/DOWN arrow keys to select the
previous or next image. Photos are indicated on the
display by “JPG”.
• Press the Left arrow key to zoom in on an image (then use UP/DOWN
to zoom in/out).
• Press OK to move around the image with the UP/DOWN and LEFT/
RIGHT keys. Press OK again to exit and return to the normal image
review.
• Press the MENU key to Delete the current image (or all images if you
select that option). Press MENU again to cancel without deleting.
• To replay a video, after pressing the Replay (OK) key, press the RIGHT
arrow key.
Cable from
“A/V Out”