EnGenius Technologies SN-920 - Manual (Page 12)

~ 17~
IDLE MODE
This is the default operating mode.
* The LCD will show the following
screen and icon placement in the
IDLE mode:
* If there is no on-going activity, the
handset automatically goes into
SLEEP/IDLE mode to save battery
power.
* The handset can be turned off
completely by holding down the
END key for 3 seconds.
The idle screen display(custom name) can be
edited (in the menu mode) with the handset owner's name
or other custom greeting.
The 2-digit number near the top center of the LCD shows
the handset's ID.
NOTE:
EnGenius
SN-920
REDIAL MENU
MENU MODE
*
*
Pressing the RIGHT SOFT FUNCTION
key activates MENU mode.
The screen will look like this in MENU
Mode:
Main Menu:
2:DIRECTORY
¡х ¡ф
R
3:CALLER ID
4:SOUNDS
5:SETTINGS
6:REGISTER
~ 18~
NOTE: The functions available through the MENU
selection are covered in greater detail under Handset
Menu Options.
In MENU mode, the handset
settings and information
contained in memory can be
changed. (For example: the Caller
ID log and Phone Directory).
All keys, except 2-WAY , are
active in MENU mode
If the handset remains inactive in MENU mode for 30 seconds
(no keys are pressed or no incoming calls), it will exit MENU
mode and return to IDLE mode
*
*
*
(Intercom)
TALK MODE
*
*
*
When the handset is in IDLE mode,
pressing the TALK key or answering
an incoming or intercom call will
activate TALK Mode.
The screen will look like this in
TALK Mode:
All keys are active in the TALK Mode.
In the TALK mode the TALK key functions as a
FLASH key. Pressing the TALK key will temporarily place
the call on hold while answering another call with the Call
Waiting feature. Pressing the TALK key again will return you
to the original call. Call Waiting requires telephone service
provider subscription.
NOTE:
00:00:08
Volume
HOLD